150. Montazerian, H.; Davoodi, E.; Baidya, A.; Baghdasarian, S.; Sarikhani, E.; Meyer, C. E.; Haghniaz, R.; Badv, M.; Annabi, N.; Khademhosseini, A.; Weiss, P. S. Engineered Hemostatic Biomaterials for Sealing Wounds. Chem. Rev. 2022.

149. Ghovvati, MBaghdasarian, SBaidya, ADhal, JAnnabi, N. Engineering a highly elastic bioadhesive for sealing soft and dynamic tissuesJ Biomed Mater Res20221107): 1511– 1522. doi:10.1002/jbm.b.35012

148. A. Yung, Y. Liu, S. Gholizadeh, A. Naderi, F. Kahale, N. Annabi, R. Dana; Development of a Moxifloxacin Eluting Hydrogel Patch for Sealing Ocular Lacerations. Invest. Ophthalmol. Vis. Sci. 2022;63(7):4149 – F0141.

147. M. Ghovvati, M. Kharaziha, R. Ardehali, N. Annabi. “Recent advances in designing electroconductive biomaterials for cardiac tissue engineering.”

146. E. Davoodi, H. Montazerian, M. Zhianmanesh, R. Abbasgholizadeh, R. Haghniaz, A. Baidya, H. Pourmohammadali, N. Annabi, P. Weiss, E. Toyserkani, A. Khademhosseini. “Template-Enabled Biofabrication of Thick 3D Tissues with Patterned Perfusable Macrochannels (Adv. Healthcare Mater. 7/2022)

145. M. Ghovvati, S. Baghdasarian, A. Baidya, J. Dhal, N. Annabi. “Engineering a highly elastic bioadhesive for healing soft and dynamic tissues” Applied Biomaterials (2022) Link

144. E. Davoodi, H. Montazerian, M. Zhianmanesh, R. Abbasgholizadeh, R. Haghniaz, A. Baidya, H. Pourmohammadali, N. Annabi, P. Weiss, E. Toyserkani, A. Khademhosseini. “Template-Enabled Biofabrication of Thick 3D Tissues with Patterned Perfusable Macrochannels” Advanced Healthcare Materials (2022) Link

143. L. Jackson, H. Shi, J. Acevedo, S. Lee, N. Annabi, R Word, M. Florian-Rodriguez. “Effect of gelatin methacryloyl hydrogel on healing of the guinea pig vaginal wall with or without mesh augmentation” Int’l Urogynecology Journal (2022) Link

142. C. Jumelle, A. Yung, E. Sani, Y. Taketani, F. Gantin, L. Bourel, S. Wang, E. Yüksel, S. Seneca, N. Annabi, R. Dana. “Development and characterization of a hydrogel-based adhesive patch for sealing open-globe injuries” Acta biomaterialia (2022) Link

141. S. Baghdasarian, B. Saleh, A. Baidya, H. Kim, M. Ghovvati, E. Shirzaei Sani, R. Haghniaz, S. Madhu, M. Kanelli, I. Noshadi, N. Annabi. “Engineering a naturally derived hemostatic sealant for sealing internal organs” Materials Today Bio. (2022) Link

140. E. Davoodi, H. Montazerian, M. Zhianmanesh, R. Abbasgholizadeh, R. Haghniaz, A. Baydia, H. Pourmohammadali, N. Annabi, P. Weiss, E. Toyserkani, A. Khademhosseini. “Template-Enables Biofabrication of Thick Three-Dimensional Tissues with Patterned Perfusable Macro-Channels”, Advanced Healthcare Materials. (2021)Link

139. C. Jumelle, A. Yung, E. Sani, Y. Taketani, F. Gantin, L. Bourel, S. Wang, E. Yuksel, S. Seneca, N. Annabi, R. Dana “Development and characterization of a hydrogel-based adhesive patch for sealing open-globe injuries”, Acta Biomaterialia. (2021)Link

138. A. Mostafavi, M. Samandari, M. Karvar, M. Ghovvati, Y. Endo, I. Sinha, N. Annabi, A. Tamayol, “Colloidal multiscale porous adhesive (bio)inks
facilitate scaffold integration”, Applied Physics Reviews. (2021) 10.1063 Link

137. G. Ruiz‑Esparza, X. Wang, X. Zhang, S. Jimenez‑Vazquez, L. Diaz‑Gomez, A. Lavoie, S. Afewerki, A. Fuentes‑Baldemar, R. Parra‑Saldivar, N Jiang, N. Annabi, B. Saleh, A. Yetisen, A. Sheikhi, T. Jozefiak, S. Shin, N. Dong, A. Khademhosseini, “Nanoengineered Shear‑Thinning Hydrogel Barrier
for Preventing Postoperative Abdominal Adhesions”, Nano-Micro Letters. (2021) 13:212

136.H. Montazerian, A. Baidya, R. Haghniaz, E. Davoodi, S. Ahadian, N. Annabi*, A. Khademhosseini, P.S. Weiss. “Stretchable and Bioadhesive Gelatin Methacryloyl-Based Hydrogels Enabled by in Situ Dopamine Polymerization.” ACS Applied Materials & Interfaces. (2021) DOI: 10.1021/acsmami.1c1004 Link

135. G. Unal, J. Jones, S. Baghdasarian, N. Kaneko, E.S. Sani, S. Lee, S. Gholizadeh, S. Tateshima, N. Annabi*. “Engineering elastic sealants based on gelatin and elastin-like polypeptides for endovascular anastomosis.” Bioengineering & Translational Medicine. 2021. DOI: 10.1002/btm2.10240. 

134.  M Kharaziha, A Baidya, and N Annabi*. “Rational Design of Immunomodulatory Hydrogels for Chronic Wound Healing.” Advanced Materials (Deerfield Beach, Fla.) (2021): e2100176-e2100176.

133. N Kaneko, M Ghovvati, Y Komuro, L Guo1, K Khatibi1, L L P Mejia, H Saber, N Annabi and S Tateshima* . “A new aspiration device equipped with a hydro-separator for acute ischemic stroke due to challenging soft and stiff clots”.  Interventional Neuroradiology (2021): 15910199211015060.

132. S. Gholizadeh, Z. Wang, X. Chen, R. Dana, N. Annabi *. ” Advanced nanodelivery platforms for topical ophthalmic drug delivery”. Drug Discovery Today, Volume 00, Number 00, April 2021.

131. H. Lia, T. Baguéa, A. Kirschner, A.N. Strat, H. Robert, R.W. Weisenthal, A.E. Patteson, N. Annabi, W.D. Stamer, P.S. Ganapathy, S. Herberg*. “A tissue-engineered human trabecular meshwork hydrogel for advanced glaucoma disease modeling”. Experimental Eye Research, In press, 2021.

130. N, Zandi, B. Dolatyar, R. Lotfi1, Y. Shallageh, M.A. Shokrgozar, E. Tamjid, N. Annabi, A. Simchi*. “Biomimetic Bilayer Nanocomposite Structures for Enhanced Full-Thickness Cutaneous Wound Healing”. Acta Biomaterialia, In press, 2021.

129. C. F. Bellani, K. Yue, F. Flaig, A. Hébraud, P. Ray, N. Annabi, H. S. S. de Araújo, M. C. Branciforti, A. M. M. Gaspar, S. Shin, A. Khademhosseini, G. Schlatter*. ” Suturable elastomeric tubular grafts with patterned porosity for rapid vascularization of 3D constructs”. Biofabrication. 2021 Jan 22.  doi: 10.1088/1758-5090/abdf1d.

128. L. Jiang , S. Jung. J. Zhao, V Kasinath, T. Ichimura, J. Joseph, P. Fiorina, A. S.Liss, K. Shah, N. Annabi, N. Joshi, T. O. Akama, J. S.Bromberg, M. Kobayashi, K. Uchimura, R. Abdi*. ” Simultaneous targeting of primary tumor, draining lymph node, and distant metastases through high endothelial venule-targeted delivery”. Nano Today, Volume 36, February 2021, 101045.

127. N Zandi, E S Sani, E Mostafavi, D M Ibrahim, B Saleh, M A Shokrgozar, E T, P S Weiss, A Simchi*, N Annabi*. “Nanoengineered shear-thinning and bioprintable hydrogel as a versatile platform for biomedical applications.”  Biomaterials, Volume 267, January 2021, 120476. (*Co-corresponding Authors).

126. F. Ordikhani, N. Zandi, M. Mazaheri, G. A. Luther, M. Ghovvati, A Akbarzadeh, N. Annabi* .“Targeted nanomedicines for the treatment of bone disease and regeneration.” Medicinal Research Reviews 41.3 (2021): 1221-1254.

125. C. Jumelle, E.S. Sani, Y. Taketani, A. Yung, F. Gantin, S.K. Chauhan,N. Annabi*, R. Dana*. “Growth factor-eluting hydrogels for management of corneal defects.” Volume 120, January 2021, 111790 (*Co-corresponding Authors).

124. F.Ordikhani, V. Kasinath, M. Uehara, A. Akbarzadeh, O.Yilmam, L. Dai, H. Aksua, S. Jung, L. Jiang, X. Li, J Zhao, B. Bahmani, T. Ichimura, P Fiorina, N Annabi, R. Abdi.* “Selective trafficking of light chain-conjugated nanoparticles to the kidney and renal cell carcinoma.” Nano Today 35 (2020): 100990.

123. N Asadi, H Pazoki-Toroudi, A R D Bakhshayesh, A Akbarzadeh*, S Davaran*, N Annabi*. “Multifunctional hydrogels for wound healing: Special focus on biomacromolecular based hydrogels”. International Journal of Biological Macromolecules (2020).

122. S Lee, E S Sani, A R. Spencer, Y Guan, A S. Weiss, N Annabi*. “Human‐Recombinant‐Elastin‐Based Bioinks for 3D Bioprinting of Vascularized Soft Tissues.” Advanced Materials, 2020, 2003915.

121. S V Moghaddam*, F Abedi, E Alizadeh, B Baradaran, N Annabi*, Abolfazl Akbarzadeh*, and Soodabeh Davaran. “Lysine-embedded cellulose-based nanosystem for efficient dual-delivery of chemotherapeutics in combination cancer therapy.” Carbohydrate Polymers 250 (2020): 116861.(*Co-corresponding Authors).

120. P. Zarrintaj, E. Zangene, S. Manouchehri, L.M. Amirabad, N. Baheiraei, M.R. Hadjighasem, M.Farokhi, M.R. Ganjali, B.W. Walker, M.R. Saeb, M. Mozafari*, S. Thomas, N. Annabi*. “Conductive biomaterials as nerve conduits: Recent advances and future challenges.” Applied materials today, vol. 20 (2020). (*Co-corresponding Authors).

119. I.A. Khalil, B.Saleh, D.M. Ibrahim, C. Jumelle, A. Yung, R.Dana, N. Annabi*. “Ciprofloxacin-loaded Bioadhesive Hydrogels for Ocular Applications.” Biomaterials Science (2020)

118. A. Moghanian, R. Portillo-Lara, E. Shirzaei Sani, H. Konisky, S.H. Bassir, and N. Annabi*. “Synthesis and characterization of osteoinductive visible light‐activated adhesive composites with antimicrobial properties.” Journal of Tissue Engineering and Regenerative Medicine 14, no. 1 (2020): 66-81.

117. M. Ptaszek, R. Portillo-Lara, E. Shirzaei Sani, C. Xiao, J. Roh, X. Yu, P. Ledesma, A. Rosenzweig, C.H. Yu, N. Annabi*, J.N. Ruskin*, “GelMA Bioadhesive Improves Survival and Reduces Scar Burden in a Mouse Model of Myocardial Infarction, Journal of the American Heart Association (JAHA), In press (*Co-corresponding Authors)

116. D.M. Ibrahim, E.S. Sani, A.M. Soliman, N. Zandi, E. Mostafavi, A. Youssef, N.K. Allam, N. Annabi*, “Bioactive and Elastic Nanocomposites with Antimicrobial Properties for Bone Tissue Regeneration”, ACS Appl. Bio Mater,

115. C. Jumelle, S. Gholizadeh, F. Gantin, N. Annabi*, R. Dana*, “Advances and limitations of drug delivery systems formulated as eye drops”, Journal of Controlled Release, 2020, vol. 321, pp. 1-22 (*Co-corresponding Authors).

114. I. sildak, F. Navaeipour, H. Afsharan, G. Soydan Kanberoglu, I. Agir, T. Ozer, N. Annabi, E. Eftimie Totu, B. Khalilzadeh, “Electrochemiluminescence methods using CdS quantum dots in aptamer-based thrombin biosensors: a comparative study”, Microchimica Acta, 2020, vol.187(1), pp. 25.

113. M. Yonar, M. Uehara, N. Banouni, V. Kasinath, X. Li, L. Jiang, J. Zhao, F. Bei, S. Shin, C. L. Cetrulo, N. Annabi,* and R. Abdi*, “Cellular mechanisms of rejection of optic and sciatic nerve transplants: an observation study.” Transplantation Direct, 2020, In press. (*Co-corresponding Authors).

112. N. Zandi, E. Mostafavi, M.A. Shokrgozar, E. Tamjid, T.J. Webster, N. Annabi*, A. Simchi*, “Biomimetic proteoglycan nanoparticles for growth factor immobilization and delivery.” Biomaterials Science, 2020, 8, pp. 1127-1136. (*Co-corresponding Authors).

111. M.R. Aziziyan, W.M. Hassen, H. Sharma, E. Shirzaei Sani, N. Annabi, E.H. Frost, J.J. Dubowski, “Sodium Dodecyl Sulfate Decorated Legionella pneumophila for Enhanced Detection with a GaAs/AlGaAs Nanoheterostructure Biosensor.” Sensors and Actuators B: Chemical, Vol. 304, 2019,

110. J.R. Soucy, J. Askaryan, D. Diaz, A.N. Koppes, N. Annabi, R.A. Koppes. “Glial Cells Influence Cardiac Permittivity as Evidenced through in Vitro and in Silico Models.” Biofabrication, 2019, doi: 10.1088/1758-5090/ab4c0a.

109. M. Uehara, B. Bahmani, L. Jiang, S. Jung, N. Banouni, V. Kasinath, Z. Solhjou, Z. Jing, F. Ordikhani, M. Bae, N. Annabi, M.M. McGrath, R. Abdi, “Nanodelivery of Mycophenolate Mofetil to the Organ Improves Transplant Vasculopathy.” ACS Nano, 2019, In Press, doi: 10.1021/acsnano.9b05115.

108. A. Moghanian, R. Portilla-Lara, E. Shirzaei Sani, H. Konisky, S.H. Bassir, N. Annabi, “Synthesis and Characterization of osteoinductive visible light-activated adhesive composites with antimicrobial properties”. Tissue Engineering and Regenerative Medicine, 2019, In press.

107. D. Rana, T. Colombani, H.S. Mohammed, L. Eggermont, S. Johnson, N. Annabi*, S.A. Bencheri*, “Strategies to prevent dopamine oxidation and related cytotoxicity using various antioxidants and nitrogenation.” Emergent Materials, 2019, Vol. 2(2), 209-217,, (*Co-corresponding Authors).

106. A. Spencer, E. Shirzaei Sani, J.R. Soucy, C.C. Corbet, A. Primbetova, R.A. Koppes, N. Annabi, “Bioprinting of a cell-laden conductive hydrogel composite.” ACS Applied Materials & Interfaces, 2019, vol. 11, 30518- 30533.

105. E. Shirzaei Sani, R. Portillo Lara, Z. Aldawood, S.H. Bassir, D. Nguyen, A. Kantarci, G. Intini, N. Annabi, “An Antimicrobial Dental Light Curable Bioadhesive Hydrogel for Treatment of Peri-Implant Diseases.” Matter, Vol. 1(5), 1114-1115, 2019, 

104. Zandi, E. Mostafavi, M. Shokrgozar, E. amjid, T. Webster, N. Annabi* and A. Simchi*, “Biomimetic Proteoglycan Nanoparticles for Growth Factor Immobilization and Delivery” Biomater. Sci.,2019, DOI: 10.1039/C9BM00668K, (*Co-corresponding Authors). 

103. B. Saleh, H.K. Dhaliwal, R. Portillo-Lara, E. Shirzaei Sani, R. Abdi, M. M. Amiji, N. Annabi, “Local Immunomodulation Using an Adhesive Hydrogel Loaded with miRNA-laden Nanoparticles Promotes Wound Healing”, Small, 2019, 15, 1902232.

102. M. Uehara1, X. Li, A. Sheikhi, N. Zandi, B. Walker, B. Saleh, N. Banouni, L. Jiang, F. Ordikhani, L. Dai, M. Yonar, I. Vohra, V. Kasinath, D. P. Orgill, A. Khademhosseini, N. Annabi*, R. Abdil*, “Anti-IL-6 eluting immunomodulatory biomaterials prolong skin allograft survival”, Scientific Reports, 9:6535 , 2019 (*Co-corresponding Authors).

101. C. Rinoldi, A. Fallahi, I. Yazdi, J. C. Paras, E. Kijeńska-Gawrońska, G. T. Santiago, A. Tuoheti, D. Demarchi, N. Annabi, A. Khademhosseini, W. Swieszkowski, A. Tamayol, “Mechanical and biochemical stimulation of 3D multilayered scaffolds for tendon tissue engineering”, ACS Biomater. Sci.5 (6), 2953-2964 DOI: 10.1021/acsbiomaterials.8b01647 ,2019.

100. M. Comotto, S. Saghazadeh, S. Bagherifard, B. Aliakbarian, M. Kazemzadeh-Narbat, F. Sharifi, S.A. Mousavi Shaegh, E. Arab-Tehrany, N. Annabi, Perego P, Khademhosseini A, Tamayol A, “Breathable hydrogel dressings containing natural antioxidants for management of skin disorders”, Journal of Biomaterials Applications , Vol. 33(9) 1265–1276, 2019.

99. G. Trujillo-de Santiago, R. Sharifi, K. Yu, S. Saheb Kashaf, M. Moises Alvarez, J. Leijten, A. Khademhosseini, N. Annabi, “Ocular adhesives: Design, chemistry, crosslinking mechanisms, and applications”, Biomaterials, , vol.197, pp. 345-367, 2019.

98. E. Shirzaei Sani, A. Kheirkhah, D. Rana, Z. Sun, W. Foulsham, A. Sheikhi, A. Khademhosseini, R. Dana, N. Annabi, “Sutureless Repair of Corneal Injuries Using Naturally Derived Bioadhesive Hydrogels”, Science Advances, 2019, vol. 5(3), eaav1281.

97. M. Alizadeh-Ghodsi, M, Pourhassan-Moghaddam, A. Zavari-Nematabad, B. Walker, N. Annabi*, A. Akbarzadeh*, “State-of-the-Art and Trends in Synthesis, Properties, and Application of Quantum Dots- Based Nanomaterials”, Particle & Particle Systems Characterization, vol. 36(2), pp. 1-20, 2019. (* Co-corresponding Authors).

96. B. W. Walker, R. Portillo Lara, E. Mogadam, C. H. Yu, W. Kimball, N. Annabi, “Rational design of microfabricated electroconductive hydrogels for biomedical applications”, Progress in Polymer Science, vol. 92, pp. 135-157.Adobe_PDF_file_icon_24x24

95. B. W. Walker, R. Portillo Lara, C. H. Yu, E. Shirzaei Sani, N. Annabi, “Engineering a naturally-derived adhesive and conductive cardiopatch”, Biomaterials, 207, 89101, DOI: 10.1016/j.biomaterials.2019.03.015.Adobe_PDF_file_icon_24x24

94. A. Singh, M. Nikkhah, N. Annabi, “Biomaterials, Cells, and Patho-physiology: Building Better Organoids and On-Chip Technologies”, Biomaterials, vol.198, pp.1, 2019.Adobe_PDF_file_icon_24x24

93. R. Portillo-Lara, A. Spencer, E. Shirzaei Sani, B Walker, N. Annabi, “Towards the engineering of biomimetic cardiovascular constructs for high throughput drug screening and therapy validation”, Biomaterials, vol.198, pp. 78-94, 2019.Adobe_PDF_file_icon_24x24

92. M. Farshbaf, S. Davaran, F. Rahimi, N. Annabi, R. Salehi, A. Akbarzadeh, “Carbon quantum dots: recent progress on synthesis, surface modification, and applications”, Artificial Cells, Nanomedicine, and Biotechnology, vol. 46(7), pp. 1331-1348, 2018.Adobe_PDF_file_icon_24x24

91. A. Rahmani, D. Bakhshayesh, N. Annabi, R. Khalilov, A. Akbarzadeh, M. Samiei, E. Alizadeh, M.A. Ghodsi, S. Davaran, A. Montaseri, “Recent advances on biomedical applications of scaffolds in wound healing and dermal tissue engineering”, Artificial Cells, Nanomedicine, and Biotechnology, vol. 46(4), pp. 691-705, 2018.Adobe_PDF_file_icon_24x24

90. M. Farshbaf, R. Salehi, N. Annabi, R. Khalilov, A. Akbarzadeh, S. Davaran, “pH- and thermo-sensitive MTX-loaded magnetic nanocomposites: synthesis, characterization, and in vitro studies on A549 lung cancer cell and MR imaging”, Drug development and industrial pharmacy, 44(3), pp. 1-11, 2018.Adobe_PDF_file_icon_24x24

89. A. Akbarzadeh, R. Khalilov, E. Mostafavi, N. Annabi, E. Abasi, T. Kafshdooz, R. Herizchi, T. Kavetskyy, S. Saghf, A. Nasibova, S. Davaran, “Role of dendrimers in advanced drug delivery and biomedical applications: a review”, Experimental Oncology, 2018.Adobe_PDF_file_icon_24x24

88. F. Ordikhani, M. Uehara, V. Kasinath, L. Dai, S.K. Eskandari, B. Bahmani, M. Yonar, J.R. Azzi, Y. Haik, P.T. Sage, G.F. Murphy, N. Annabi, T. Schatton, I. Guleria, R. Abdi, “Targeting antigen-presenting cells by anti–PD-1 nanoparticles augments antitumor immunity”, JCI Insight, 3(20): e122700, 2018.Adobe_PDF_file_icon_24x24

87. B. Bahmani, M. Uehara, F. Ordikhani, X. Li, L. Jiang, N. Banouni, T. Ichimura, V. Kasinath, S.K. Eskandari, N. Annabi, J.S. Bromberg, L.D. Shultz, D.L. Greiner, R. Abdi, “Ectopic high endothelial venules in pancreatic ductal adenocarcinoma: A unique site for targeted delivery”, EBioMedicine, vol. 38, pp. 79-88, 2018.Adobe_PDF_file_icon_24x24

86. A. Farzin, AK. Miri, F.Sharifi, N. Faramarzi, A. Jaberi, A. Mostafavi, R. Solorzano, Y. Shrike Zhang, N. Annabi, A. Khademhosseini, A. Tamayol, “3D printed sugar-based stents facilitating vascular anastomosis”, Advanced Healthcare Materials, vol. 7(24), 2018.Adobe_PDF_file_icon_24x24

85. G. Trujillo-de Santiago, M. M. Alvarez, M. Samandari, G. Prakash, G. Chandrabhatla, P. I. Rellstab-Sánchez, B. Byambaa, P. Pour Shahid Saeed Abadi, A. Vallejo-Arroyo, S. Mandla, R. Avery, A. Nasajpour, N. Annabi, Y. S. Zhang, A. Khademhosseini, “Chaotic 3D printing: Using simple chaotic flows to fabricate complex microstructures”, Materials Horizons, vol. 5 (5), 813-822, 2018.Adobe_PDF_file_icon_24x24

84. M. Fares, E. Shirzaei Sani, R. R. B. Oliveira, R. Portillo-Lara, Ali Khademhosseni, N. Annabi “Engineering Interpenetrating Network of Gelatin Methacryloyl (GelMA) and Pectin-g-PCL Hydrogels with Tunable Properties for Tissue Engineering”, Biomaterials Science, vol. 6 (11), 2938-2950Adobe_PDF_file_icon_24x24

83.  E. Shirzaei Sani, R. Portillo-Lara, I. Noshadi, W. Yu, B. M. Geilich, A. Spencer, T. J. Webster, and N. Annabi, “Engineering adhesive hyaluronic acid/elastin like polypeptide hybrid hydrogels for tissue engineering applications”, ACS Biomaterials Science & Engineering, vol. 4(7), pp. 2528-40, 2018.Adobe_PDF_file_icon_24x24

82.  M. Farshbaf, S. Davaran, Amir Zarebkohan, N. Annabi, A. Akbarzadeh, R. Salehif, “Significant role of cationic polymers in drug delivery systems”, Artificial Cells, Nanomedicine, and Biotechnology, 2017, In press,

81. Jonathan R. Soucy, Ehsan Shirzaei Sani, Roberto Portillo Lara, David Diaz, Felipe Dias, Anthony S. Weiss, Abigail N. Koppes, Ryan A. Koppes, Nasim Annabi, “Photocrosslinkable Gelatin/Tropoelastin Hydrogel Adhesives for Peripheral Nerve Repair”, Tissue Engineering Part A, 2018 Adobe_PDF_file_icon_24x24

80. A Spencer, A Primbetova, AN Koppes, R Koppes, H Fenniri, N Annabi, “Electroconductive Gelatin Methacryloyl-PEDOT: PSS Composite Hydrogels: Design, Synthesis, and Properties”, ACS Biomaterials Science & Engineering, 2018, DOI:10.1021/acsbiomaterials.8b00135 Adobe_PDF_file_icon_24x24

79. Nahideh Asadi, Nasim Annabi, Ebrahim Mostafavi, Maryam Anzabi, Rovshan Khalilov, Siamak Saghfi, Masoud Mehrizadeh, Abolfazl Akbarzadeh, “Synthesis, characterization and in vitro evaluation of magnetic nanoparticles modified with PCL–PEG–PCL for controlled delivery of 5FU”, Artificial Cells, Nanomedicine, and Biotechnology, (2018), 1-8. Adobe_PDF_file_icon_24x24

78. Afsoon Fallahi, Nona Khadivi, Nima Roohpour, Andrew M. Middleton, Mehdi Kazemzadeh-Narbat, Nasim Annabi, Ali Khademhosseini, Ali Tamayol, “Characterization, mechanistic analysis and improving the properties of denture adhesives”, Dental Materials, 34 (1) 2018, 120-131. Adobe_PDF_file_icon_24x24

77. Amir Nasajpour, Sahar Ansari , Chiara Rinoldi, Afsaneh Shahrokhi Rad, Tara Aghaloo, Su Ryon Shin, Yogendra Kumar Mishra, Rainer Adelung, Wojciech Swieszkowski, Nasim Annabi, Ali Khademhosseini, Alireza Moshaverinia, Ali Tamayol, ” A Multifunctional Polymeric Periodontal Membrane with Osteogenic and Antibacterial Characteristics”, Advanced Functional Materials2018, 28, 1703437. Adobe_PDF_file_icon_24x24

76. Kan Yue, Yanhui Liu, Batzaya Byambaa, Vaishali Singh, Wanjun Liu, Xiuyu Li, Yunxia Sun, Shrike Yu Zhang, Ali Tamayol, Peihua Zhang, Kee Woei Ng, Nasim Annabi, Ali Khademhosseini, ” Visible Light Crosslinkable Human Hair Keratin Hydrogels”, Bioengineering & Translational Medicine2018, 3, 37-48. Adobe_PDF_file_icon_24x24

75. Mehrdad Samadishadlou, Masoud Farshbaf, Nasim Annabi, Taras Kavetskyy, Rovshan Khalilov, Siamak Saghfi, Abolfazl Akbarzadeh, Sepideh Mousavi, “Magnetic carbon nanotubes: preparation, physical properties, and applications in biomedicine”, Artificial Cells, Nanomedicine, and Biotechnology, 2017, 1-17. Adobe_PDF_file_icon_24x24

74. Dai, W. Wang, P. Wang, M. Zahir Iqbal, N. Annabi, N. Amin, “Realization of tunable artificial synapse and memory based on amorphous oxide semiconductor transistor” Scientific Report, 2017, 7:10997. DOI:10.1038/s41598-017-04641-5 Adobe_PDF_file_icon_24x24

73. Nasim Annabi*, Yi-Nan Zhang, Alexander Assmann, Ehsan Shirzaei Sani, George Cheng, Antonio D. Lassaletta, Andrea Vegh, Bijan Dehghani, Guillermo U. Ruiz-Esparza, Xichi Wang, Sidhu Gangadharan, Anthony S. Weiss, Ali Khademhosseini*, “Engineering a highly elastic human protein-based sealant for surgical applications”, Science Translational Medicine, 2017, 9(410) (* Co-senior Authors). [Featured on the cover of journal, News coverage] Adobe_PDF_file_icon_24x24

72. Amir Nasajpour, Serena Mandla, Sindu Shree, Ebrahim Mostafavi, Roholah Sharifi, Akbar Khalilpour, Saghi Saghazadeh, Shabir Hassan, Michael J. Mitchell, Jeroen Leijten, Xu Hou, Alireza Moshaverinia, Nasim Annabi, Rainer Adelung,Yogendra Kumar Mishra, Su Ryon Shin, Ali Tamayol, Ali Khademhosseini, ” Nanostructured Fibrous Membranes with Rose Spike-Like Architecture”, Nano Letters201717 (10), pp 6235–6240. DOI: 10.1021/acs.nanolett.7b02929. Adobe_PDF_file_icon_24x24

71. Iman Noshadi, Seonki Hong, Kelly E Sullivan, Ehsan Shirzaei Sani, Roberto Portillo Lara, Ali Tamayol, Su-Ryon Shin, Albert E Gao, Whitney L Stoppel, Lauren Black, Ali Khademhosseini* and Nasim Annabi*, “In Vitro and In Vivo Analysis of Visible Light Crosslinkable Gelatin Methacryloyl (GelMA) Hydrogels”, Biomaterials Science, 2017 2017,5, 2093-2105 (DOI: 10.1039/C7BM00110J) (* Co-senior Authors). Adobe_PDF_file_icon_24x24

70. Byung-Hyun Cha, Su Ryon Shin, Jeroen Leijten, Nihal Engin Vrana, Amir M. Ghaemmaghami, Julie C. Liu, Nasim Annabi, Reza Abdi, Mehmet R. Dokmeci, Ali Khademhosseini, “Integrin-mediated interactions control macrophage polarization in 3D hydrogels”, Advanced Healthcare Materials (2017).Adobe_PDF_file_icon_24x24

69. Ali Tamayol, Alireza Hassani Najafabadi, Pooria Mostafalu, Ali Yetisen, Mattia Comotto, Musab Aldhahri, Mohamed Shaaban Abdel-wahab, Zeynab Izadi Najafabadi, Shahrzad Latifi, Mohsen Akbari, Nasim Annabi, Seok-Hyun Yun, Adnan Memic, Mehmet Dokmeci, and Ali Khademhosseini, “Biodegradable elastic nanofibrous platforms with integrated flexible heaters for on-demand drug delivery”, Scientific Reports, 2017, 7:9220.Adobe_PDF_file_icon_24x24

68. Alexander Assmann, Andrea Vegh, Mohammad Ghasemi-Rad, Sara Bagherifard, George Cheng, Ehsan Shirzaei Sani, Guillermo U. Ruiz-Esparza, Iman Noshadi, Antonio Lassaletta, Sidhu Gangadharan, Ali Tamayol, Ali Khademhosseinib, Nasim Annabi, “A highly adhesive and naturally derived sealant”,Biomaterials 140 (2017) 115-127, DOI: 10.1016/j.biomaterials.2017.06.004. Adobe_PDF_file_icon_24x24

67. Nasim Annabi, Devyesh Rana, Ehsan Shirzaei Sani, Roberto Portillo-Lara, Jessie L Gifford, Mohammad M Fares, Suzanne M Mithieux, Anthony S Weiss, “Engineering a sprayable and elastic hydrogel adhesive with antimicrobial properties for wound healing”, Biomaterials, 139 (2017) 229-243, DOI: j.biomaterials.2017.05.011 Adobe_PDF_file_icon_24x24

66. I. Noshadi, B. W. Walker, R. Portillo Lara, E. Shirzaei Sani, N. Gomes, M.R. Aziziyan, N. Annabi, “Engineering Biodegradable and Biocompatible Bio-ionic Liquid Conjugated Hydrogels with Tunable Conductivity and Mechanical Properties”, Scientific Reports, 7, (20174345 Adobe_PDF_file_icon_24x24

65. M. Jamadi, P. Shokrollahi, B. Houshmand, M. Daliri Joupari, F. Mashhadiabbas, A. Khademhosseini, N. Annabi, “Poly (ethylene glycol)-Based Hydrogels as Self-Inflating Tissue Expanders with Tunable Mechanical and Swelling Properties”, Macromolecular Bioscience, 2017, vol. 179(8).Adobe_PDF_file_icon_24x24

64. Batzaya Byambaa, Nasim Annabi* , Kan Yue, Grissel Trujillo de Santiago, Mario Moisés Alvarez, Weitao Jia, Mehdi Kazemzadeh-Narbat, Su Ryon Shin, Ali Tamayol, Ali Khademhosseini*, “Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue”, Advanced Healthcare Materials, 2017, 6(16) (* Co-senior Authors) DOI: 10.1002/adhm.201700015.Adobe_PDF_file_icon_24x24

63. Kan Yue, Xiuyu Li, Karsten Schrobback, Nasim Annabi, Amir Sheikhi, Jeroen Leijten, Weijia Zhang, Yu Shrike Zhang, Dietmar W. Hutmacher, Travis J. Klein, Ali Khademhosseini, “Structural Analysis of Photocrosslinkable Methacryloyl-Modified Protein Derivatives”, Biomaterials (2017).Adobe_PDF_file_icon_24x24

62. Adnan Memic, Musab Aldhahri, Ali Tamayol, Pooria Mostafalu, Mohamed Shaaban Abdel-wahab, Mohamadmahdi Samandari, Kamyar Mollazadeh Moghaddam, Nasim Annabi, Sidi A Bencherif, Ali Khademhosseini,”Nanofibrous Silver-Coated Polymeric Scaffolds with Tunable Electrical Properties”, Nanomaterials (2017), 7(3), 63 (doi:10.3390/nano7030063) Adobe_PDF_file_icon_24x24

61. Mehdi Kazemzadeh-Narbat, Jeroen Rouwkema, Nasim Annabi, Hao Cheng, Masoumeh Ghaderi, Byung-Hyun Cha, Mansi Aparnathi, Akbar Khalilpour, Batzaya Byambaa, Esmaiel Jabbari, Ali Tamayol, Ali Khademhosseini, “Engineering Photocrosslinkable Bicomponent Hydrogel Constructs for Creating 3D Vascularized Bone”, Advanced Healthcare Materials, 2017, vol. 6(10) (* Co-senior Authors) Adobe_PDF_file_icon_24x24

60. Hao Cheng, Kan Yue, Mehdi Kazemzadeh-Narbat, Yanhui Liu, Akbar Khalilpour, Bingyun Li, Yu Shrike Zhang, Nasim Annabi, and Ali Khademhosseini, “Mussel-Inspired Multifunctional Hydrogel Coating for Prevention of Infections and Enhanced Osteogenesis”, ACS Applied Materials and Interfaces 20179 (13), pp 11428–11439 (DOI: 10.1021/acsami.6b16779) Adobe_PDF_file_icon_24x24

59. Xin Zhao, Xiaoming Sun, Lara Yildirimer, Qi Lang, Zhi Yuan William Lin, Reila Zheng, Yuguang Zhang, Wenguo Cui, Nasim Annabi, Ali Khademhosseini. “Cell infiltrative hydrogel fibrous scaffolds for accelerated wound healing,” Acta Biomaterialia, 2017, 49, 66–77 (DOI:10.1016/j.actbio.2016.11.017).Adobe_PDF_file_icon_24x24

58. Everardo González-González, Mario Moisés Alvarez, Alan Roberto Márquez-Ipiña, Grissel Trujillo-de Santiago, Luis Mario Rodríguez-Martínez, Nasim Annabi, Ali Khademhosseini, “Anti-Ebola therapies based on monoclonal antibodies: current state and challenges ahead”, Critical Reviews in Biotechnology, 37 (1), 53-68 (DOI:10.3109/07388551.2015.1114465)Adobe_PDF_file_icon_24x24

57. Amir Mellati, Chia‐Ming Fan, Ali Tamayol, Nasim Annabi, Sheng Dai, Jingxiu Bi, Bo Jin, Cory Xian, Ali Khademhosseini, Hu Zhang, “Microengineered 3D cell‐laden thermoresponsive hydrogels for mimicking cell morphology and orientation in cartilage tissue engineering”, Biotechnology and Bioengineering, 2017, 114(1), 217-231 (DOI: 10.1002/bit.26061) Adobe_PDF_file_icon_24x24

56. Xin Zhao, Qi Lang, Lara Yildirimer, Zhi Yuan Lin, Wenguo Cui, Nasim Annabi, Kee Woei Ng, Mehmet R Dokmeci, Amir M Ghaemmaghami, Ali Khademhosseini. “Photocrosslinkable Gelatin Hydrogel for Epidermal Tissue Engineering”, Advanced Healthcare Materials, 2016, 5 (1), 108-118 (DOI: 10.1002/adhm.201500005) Adobe_PDF_file_icon_24x24

55. Roberto Portillo-Lara, Nasim Annabi. “Microengineered cancer-on-a-chip platforms to study the metastatic microenvironment”, Lab on a Chip, 2016, 16 (21), 4063-4081 (DOI:10.1039/C6LC00718J) Adobe_PDF_file_icon_24x24

54. Hojatollah Rezaei Nejad, Zahra Goli Malekabadi, Mehdi Kazemzadeh Narbat, Nasim Annabi, Pooria Mostafalu, Farhang Tarlan, Yu Shrike Zhang, Mina Hoorfar, Ali Tamayol, Ali Khademhosseini. “Laterally Confined Microfluidic Patterning of Cells for Engineering Spatially Defined Vascularization”, Small, 2016, 12 (37), 5132-5139 (DOI: 10.1002/smll.201601391) Adobe_PDF_file_icon_24x24

53. Mohammadmajid Sepantafar, Reihan Maheronnaghsh, Hossein Mohammadi, Sareh Rajabi-Zeleti, Nasim Annabi, Nasser Aghdami, Hossein Baharvand. “Stem cells and injectable hydrogels: Synergistic therapeutics in myocardial repair”, Biotechnology Advances, 2016, 34(4), 362-379 (DOI: 10.1002/smll.201601391) Adobe_PDF_file_icon_24x24

52. Sahar Ansari, Chider Chen, Xingtian Xu, Nasim Annabi, Homayoun H Zadeh, Benjamin M Wu, Ali Khademhosseini, Songtao Shi, Alireza Moshaverinia. “Muscle Tissue Engineering Using Gingival Mesenchymal Stem Cells Encapsulated in Alginate Hydrogels Containing Multiple Growth Factors”,  Annals of Biomedical Engineering, 2016, 44(6), 1908-1920 (DOI: 10.1007/s10439-016-1594-6) Adobe_PDF_file_icon_24x24

51. Shahrzad Latifi, Ali Tamayol, Rouhollah Habibey, Reza Sabzevari, Cyril Kahn, David Geny, Eftekhar Eftekharpour, Nasim Annabi, Axel Blau, Michel Linder, Elmira Arab-Tehrany. “Natural lecithin promotes neural network complexity and activity.” Scientific Reports, 2016, 6, 25777 (DOI:  10.1038/srep25777) Adobe_PDF_file_icon_24x24

50. Su Ryon Shin, Raziyeh Farzad, Ali Tamayol, Vijayan Manoharan, Pooria Mostafalu, Yu Shrike Zhang, Mohsen Akbari, Sung Mi Jung, Duckjin Kim, Mattia Comotto, Nasim Annabi, Faten Ebrahim Al‐Hazmi, Mehmet R Dokmeci, Ali Khademhosseini. “A Bioactive Carbon Nanotube‐Based Ink for Printing 2D and 3D Flexible Electronics.” Advanced Materials. 2016, 28(17), 3280–3289 (DOI: 10.1002/adma.201506420) Adobe_PDF_file_icon_24x24

49. P Hassanzadeh, M Kazemzadeh-Narbat, R Rosenzweig, X Zhang, A Khademhosseini, N Annabi, M Rolandi. “Ultrastrong and flexible hybrid hydrogels based on solution self-assembly of chitin nanofibers in gelatin methacryloyl (GelMA)”, Journal of Materials Chemistry, 2016, 4(15), 2539-2543 (DOI: 10.1039/C6TB00021E) Adobe_PDF_file_icon_24x24

48. N. Bhise, V. Manoharan, S. Massa, A. Tamayol, M. Ghaderi, M. Miscuglio, Q. Lang, Y. S. Zhang, S. R. Shin, G. Calzone, N. Annabi, T. D. Shupe, C. E. Bishop, A. Atala, M. R. Dokmeci, A. Khademhosseini. “A liver-on-a-chip platform with bioprinted hepatic spheroids”, Biofabrication, 2016, 8 (1), 014101. Adobe_PDF_file_icon_24x24

47. N. Annabi, S. Shin, M. Miscuglio, M. Afshar, S.M., M.R. Dokmeci, X. Tang, A.S. Weiss, A. Khademhosseini. “Highly elastic and conductive human-based protein hybrid Hydrogels”, Advanced Materials, 2016, 28 (1), 40-49 (DOI: 10.1002/adma.201503255)  Adobe_PDF_file_icon_24x24

46. S. Bagherifard, A. Tamayol, P. Mostafalu, M. Akbari, M. Comotto, N. Annabi, M. Ghaderi, S. Sonkusale, M.R. Dokmeci, A. Khademhosseini. “Dermal Patch with Integrated Flexible Heater for on Demand Drug Delivery,” Advanced Healthcare Materials, 2016,5 (1), 175-184 (DOI: 10.1002/adhm.201500357). Adobe_PDF_file_icon_24x24

45. K.Yue, G. Santiago, M. Moisés Alvarez, A. Tamayol, N. Annabi*, A.Khademhosseini*. “Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels”, Biomaterials, 2015, vol. 73, 254-271 (*Co-senior author). Adobe_PDF_file_icon_24x24

44. A. Tamayol*, A.H. Najafabadi*, N. Annabi, B. Aliakbarian, E. Arab Tehrany, A. Khademhosseini. “Hydrogel Templates for Rapid Manufacturing of Bioactive Fibers and 3D Constructs”, Advanced Healthcare Materials, 2015,vol. 4(14), pp. 2146-2153. (This paper was featured on the cover of the journal)Adobe_PDF_file_icon_24x24

43. M. Kazemzadeh-Narbat, N. Annabi, A. Tamayol, R. Oklu, A. Ghanem, A. Khademhosseini. “Adenosine-associated delivery systems”, Journal of Drug Targeting, 2015, vol. 23 (7-8), pp. 580-596.Adobe_PDF_file_icon_24x24

42. Y. Zhang, R. Avery, Q. Vallmajó Martín, A. Assmann, A. Vegh, A. Memic, B.D. Olsen, N. Annabi*, A. Khademhosseini*. “A highly elastic and rapid crosslinkable elastin-like polypeptide-based gels for biomedical applications”, Advanced Functional Materials, 2015, vol. 25 (30), pp. 4814-4826. *Co-senior author. Adobe_PDF_file_icon_24x24

41. N. Annabi, K. Yue, A. Tamayol, A. Khademhosseini. “Elastic sealants for surgical applications,” European Journal of Pharmaceutics and Biopharmaceutics, 2015, vol.97, pp. 25-39. Adobe_PDF_file_icon_24x24

40. M. Kazemzadeh-Narbat, N. Annabi, A. Khademhosseini. “Surgical Sealants & High Strength Adhesives”, Materials Today, 2015, vol. 18 (4), pp. 176-177 Adobe_PDF_file_icon_24x24

39. K.M.C. Tsang, N. Annabi, F. Ercole, K. Zhou, D. Karst, J.M. Haynes, R.A. Evans, H. Thissen, A. Khademhosseini, J.S. Forsythe. “Facile One-step Micropatterning Using Photodegradable Methacrylated Gelatin Hydrogels for Improved Cardiomyocyte Organization and Alignment”, Advanced Functional Materials, 2015, vol. 25 (6), pp. 977-986 (IF: 10.18) Adobe_PDF_file_icon_24x24

38. Y. Zhang, J. Ribas, A. Nadhman, J. Aleman, Š. Selimović, S. Lesher-Perez, T. Wang, V. Manoharan, S. Shin, A. Damilano, N. Annabi, M. Dokmeci, S. Takayama, A. Khademhosseini. “A cost-effective fluorescence mini-microscope for biomedical applications” Lab Chip, 2015, vol. 15 (18), pp. 3661-3669 Adobe_PDF_file_icon_24x24

37. N. Annabi, A. Tamayol, S. Shin, A.M. Ghaemmaghami, N.A. Peppas, A. Khademhosseini. “Surgical Materials: Current Challenges and Nano-enabled Solutions, Nano Today, 2014 vol 9(5), pp. 574-589 . (IF: 18.432) Adobe_PDF_file_icon_24x24

36. N. Annabi, A. Tamayol, J. Alfredo Uquillas, M. Akbari, L. Bertassoni, C. Cha, G. Camci-Unal, M. Dokmeci, N.A. Peppas*, A. Khademhosseini*. “25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine”, Advanced Materials, 2014, vol 26(1), pp.85-124. (IF: 14.829) Adobe_PDF_file_icon_24x24

35. N. Masoumi, N. Annabi, A. Assmann, J. Hjortnaes, B.L. Larson, J.E. Mayer Jr., A. Khademhosseini. “Tri-layered MSC-Seeded Elastomeric Scaffolds mimic architectural and mechanical properties of native heart valve leaflets”, Biomaterials, 2014, vol 35(27), 7774-85. (IF: 7.404) Adobe_PDF_file_icon_24x24

34. G. Camci-Unal, N. Annabi, M.R. Dokmeci, R. Liao, A. Khademhosseini “Hydrogels for Cardiac Tissue Engineering”, NPG Asia Materials, 2014, 6, e99; doi:10.1038/am.2014.19. (IF: 9.042) Adobe_PDF_file_icon_24x24

33. M. Kharaziha*, S. Shin*, M Nikkhah, N. Annabi, N. Masoomi, A. Khademhosseini. “Tough and flexible CNT–polymeric hybrid scaffolds for engineering cardiac constructs”, Biomaterials, 2014, vol 35(26), pp. 7345-54. (IF: 7.404) Adobe_PDF_file_icon_24x24

32. A.H. Najafabadi*, A. Tamayol*, N. Annabi, M. Ochoa, P. Mostafalu, M. Nikkhah, M. Akbari, M.R. Dokmeci, S. Sonkusale, B. Ziaie, A. Khademhosseini. “Biodegradable Nanofibrous Polymeric Substrates for Generating Elastic and Flexible Electronics”, Advanced Materials, In press. (IF: 14.829) Adobe_PDF_file_icon_24x24

31. M. Akbari, A. Tamayol, V. Laforte, N. Annabi, A. Khademhossein, D. Juncker. “Continuous Fabrication of Composite Living Fibers for Weaving Tissue Constructs”, Advanced Functional Materials, In press. (IF: 10.18) Adobe_PDF_file_icon_24x24

30. N. Masoumi, B.L. Larson, N. Annabi, M. Kharaziha, B. Zamanian, K.S. Shapero, A.T. Cubberley, G. Camci-Unal, J.E. Mayer Jr., A. Khademhosseini. “Electrospun PGS:PCL Microfibers Align Human Valvular Interstitial Cells and Provide Tunable Scaffold Anisotropy” Advanced Healthcare Materials, 2014, vol 3(6), pp. 929- 939. Adobe_PDF_file_icon_24x24

29. H. Anwarul, A. Memic, N. Annabi, M. Hossain, A. Paul, M.R. Dokmeci, F. Dehghani, A. Khademhosseini. “Electrospun Scaffolds for Tissue Engineering of Vascular Grafts” Acta Biomaterialia, 2014, vol 10(1), pp.11-25. (IF: 4.86). Adobe_PDF_file_icon_24x24

28. C. Cha, S. Shin, X. Gao, N. Annabi, M.R. Dokmeci, X. Tang and A. Khademhosseini. “Controlling Mechanical Properties of Cell-Laden Hydrogels by Covalent Incorporation of Graphene” Small, 2013, DOI: 10.1002/smll.201302182 (IF: 7.823). Adobe_PDF_file_icon_24x24

27. N. Annabi, K. Tsang, S.M. Mithieux, M. Nikkhah, A Ameri, A. Khademhosseini, A.S. Weiss. “Highly elastic micropatterned hydrogels for engineering functional cardiac tissues”, Advanced Functional Materials, 2013, vol. 23(39), pp.4950-4959. (IF: 10.18) (This paper was judged as “very important” by the editor, highlighted by the journal and was featured on the cover of the journal). Adobe_PDF_file_icon_24x24

26. N Annabi, S.M. Mithieux, P. Zorlutuna, G. Camci-Unal, A.S. Weiss, A. Khademhosseini. “Engineered cell-laden human protein-based elastomer”, Biomaterials, 2013, vol. 34(22), pp. 5496–5505. (IF: 7.404). Adobe_PDF_file_icon_24x24

25. N. Annabi, Š. Selimović, J.P.A. Cox, D. Heintze, A.S. Weiss, D. Cropek, A. Khademhosseini. “Extracellular matrix coated microfluidic channels for cardiomyocyte culture”, Lab Chip, 2013, vol.13, pp.3569–3577. (IF: 6.5). Adobe_PDF_file_icon_24x24

24. N. Annabi, S.M. Mithieux, G. Camci-Unal, M.R. Dokmeci, A.S. Weiss, A. Khademhosseini. “Elastomeric recombinant protein-based biomaterials”, Biochemical Engineering, 2013, vol.77, pp.110-118. (IF: 2.57) Adobe_PDF_file_icon_24x24

23. G. Camci-Unal, N. Alemdar, N. Annabi, A. Khademhosseini. “Oxygen releasing biomaterials for tissue engineering”, Polymer International, 2013, vol. 62(6), pp. 843-848. (IF: 1.9) (It was highlighted by ChemistryViews on 10 April 2013). Adobe_PDF_file_icon_24x24

22. C. Cha, S. Shin, N. Annabi, M. Dokmeci, A. Khademhosseini. “Carbon-based nanomaterials for tissue engineering” ACS Nano, 2013, 7 (4), pp. 2891-2897. (IF: 11.4) Adobe_PDF_file_icon_24x24

21. A. Tamayol*, M. Akbari*, N. Annabi, A. Paul, A. Khademhosseini, D. Juncker. “Fiber-Based Tissue Engineering: Recent Developments, Challenges, and Opportunities”, Biotechnology Advances, 2013, vol. 31(5), pp.669-687. *Equal authorship. (IF: 9.646). Adobe_PDF_file_icon_24x24

20. G. Camci-Unal, D. Cuttica, N. Annabi, D. Demarchi, A. Khademhosseini. “Synthesis and characterization of biomimetic hyaluronic acid-gelatin hydrogels for tissue engineering”, Biomacromolecules, 2013, 14 (4), pp. 1085–1092. (IF: 5.479). Adobe_PDF_file_icon_24x24

19. M. Kharaziha*, M Nikkhah*, S. Shin, N. Annabi, N. Masoomi, A. Khademhosseini. “Development of PGS/gelatin composite nanofibrous scaffolds for cardiac tissue regeneration”, Biomaterials, 2013, vol. 34(27), pp. 6355-6366. (IF: 7.404). Adobe_PDF_file_icon_24x24

18. L. H. Nguyen*, N. Annabi*, M. Nikkhah, H. Bae, L. Binan, S. Park, Y. Kang, Y. Yang, A. Khademhosseini. “Vascularized bone tissue engineering: Approaches for potential improvement”, Tissue Engineering: Part B, 2012, vol. 18(5), pp. 363-382. *Equal authorship. (IF: 4.022) Adobe_PDF_file_icon_24x24

17. P. Zorlutuna, N. Annabi, G. Camci-Unal, M. Nikkah, J. Min Cha, J. Nichol, A. Manbachi, H. Ba, S. Chen, A. Khademhosseini. “Microfabricated biomaterials for engineering 3D tissues” Advanced Materials, 2012, vol. 24, pp. 1782–1804. (IF: 13.877) Adobe_PDF_file_icon_24x24

16. S. Ostrovidov, N. Annabi, A. Seidi, M. Ramalingam, F. Dehghani, H. Kaji, A. Khademhosseini. “Controlled release of drugs from gradient hydrogels for high throughput analysis of cell/drug interactions”, Analytical Chemistry, 2012, vol. 84 (3), pp. 1302-1309. (IF: 5.856) Adobe_PDF_file_icon_24x24

15. C. Ji, N. Annabi, M. Hosseinkhani, S. Sivaloganathan, F. Dehghani. “Fabrication of poly-DL-lactide/polyethylene glycol blend scaffolds using dense gas foaming technique”, Acta Biomaterialia, 2012, vol. 8, pp. 570-578. (IF: 4.865) Adobe_PDF_file_icon_24x24

14. M. Nikkhah, N. Eshak, P. Zorlutuna, N. Annabi, M. Castello, K. Kim, A Dolatshahi-Pirouz, F. Edalat, H. Bae, Y. Yang, A. Khademhosseini. “Directed endothelial cell tubulogenesis in micropatterned gelatin methacrylate hydrogels”, Biomaterials, 2012, vol. 31(27), pp. 6941-51 (IF: 7.404) Adobe_PDF_file_icon_24x24

13. N. Annabi, A. Fathi, S.M. Mithieux, A.S. Weiss, F. Dehghani. “Fabrication of porous PCL/Elastin composite scaffolds for tissue engineering applications”, Journal of Supercritical Fluids, 2011, vol. 59, pp. 157-167. (IF: 2.86) Adobe_PDF_file_icon_24x24

12. N. Annabi, A. Fathi, S.M. Mithieux, P. Martens, A.S. Weiss, F. Dehghani. “The effect of elastin on chondrocyte adhesion and proliferation on poly (ε-caprolactone) (PCL)/elastin composites”, Biomaterials, 2011, vol. 32(6), pp.1517-1525. (IF: 7.404)Adobe_PDF_file_icon_24x24

11. F. Dehghani, N. Annabi. “Engineering porous scaffolds using gas based techniques”, Current Opinion in Biotechnology, 2011, vol. 22, pp. 661-666. (IF: 7.711) Adobe_PDF_file_icon_24x24

10. C. Ji, N. Annabi, A. Khademhosseini, F. Dehghani. “Fabrication of porous chitosan scaffolds for soft tissue engineering by using dense gas CO2”, Acta Biomaterialia, 2011, vol. 7, pp.1653-1664. (IF: 4.865) Adobe_PDF_file_icon_24x24

9. A. Seidi, H. Kaji, N. Annabi, S. Ostrovidov, M. Ramalingam, A. Khademhosseini. “A microfluidic-based neurotoxin concentration gradient for the generation of an in vitro model of Parkinson’s disease”, Biomicrofluidics, 2011, vol. 5, pp. 022214. (IF: 3.366) Adobe_PDF_file_icon_24x24

8. N. Annabi, J.W. Nichol, X. Zhong, C. Ji, S. Koshy, A. Khademhosseini, and F. Dehghani. “Controlling the porosity and microarchitecture of hydrogels for tissue engineering”, Tissue Engineering, Part B, 2010, vol. 16(4), pp. 371-380. (IF: 4.022) Adobe_PDF_file_icon_24x24

7. N. Annabi, S.M. Mithieux, A.S. Weiss, F. Dehghani. “Cross-linked open-pore elastic hydrogels based on tropoelastin, elastin and high pressure CO2”, Biomaterials, 2010, vol. 31(7), pp.1655-1665. (IF: 7.404) (This paper was featured on the cover of the Current Opinion in Biotechnology Journal, Volume 22, Issue 5) Adobe_PDF_file_icon_24x24

6. Y. Tu, S. Mithieux, N. Annabi, E. Boughton, A.S. Weiss. “Synthetic elastin hydrogels that are co-blended with heparin display substantial swelling, increased porosity and improved cell penetration”, Journal of Biomedical Materials Research: Part A, 2010, vol. 95a(4), pp. 1215-1222. (IF: 2.625) Adobe_PDF_file_icon_24x24

5. J.L. Ellis, J.C. Titon, D.L. Tomasko, N. Annabi, F. Dehghani. “Supercritical CO2 Sterilization of Ultra-High Molecular Weight Polyethylene”, Journal of Supercritical Fluids, 2010, vol. 52, pp. 235–240. (IF: 2.86)Adobe_PDF_file_icon_24x24

4. N. Annabi, S.M. Mithieux, E.A. Boughton, A.J. Ruys, A.S. Weiss, F. Dehghani. “Synthesis of highly porous cross-linked elastin hydrogels and their interaction with fibroblasts in vitro”, Biomaterials, 2009, vol. 30, pp.4550-4557. (IF: 7.404) Adobe_PDF_file_icon_24x24

3. N. Annabi, S.M. Mithieux, A.S. Weiss, F. Dehghani. “The fabrication of elastin based hydrogels using high pressure CO2”, Biomaterials, 2009, vol. 30(1), pp. 1-7. (IF: 7.404) Adobe_PDF_file_icon_24x24

2. F. Dehghani, N. Annabi, M. Titus, P. Valtchev, A. Tumilar. “Sterilization of ginseng using a high pressure CO2 at moderate temperatures” Biotechnology and Bioengineering, 2009, vol. 102(2), pp. 569-576. (IF: 3.95) Adobe_PDF_file_icon_24x24

1. F. Dehghani, N. Annabi, P. Valtchev, S.M. Mithieux, S.G. Kazarian, F.H. Tay, A.S. Weiss. “Effect of dense gas CO2 on the coacervation of elastin”, Biomacromolecules, 2008, vol. 9(4), pp. 1100-1105. (IF: 5.479) Adobe_PDF_file_icon_24x24